19-inch 1U Rack Mounting 44-Port Gigabit /10Gigabit Layer 3 TSN Industrial Ethernet Switch
Support 24 Gigabit copper ports, 16 Gigabit SFP slots, 4 10Gigabit SFP+ slots
Support Precision Time Protocol (PTP), provide sub-microsecond synchronization accuracy to meet requirements for high-precision time synchronization
Support TSN (time sensitive networking) protocol standards such as IEEE802.1AS, IEEE802.1Qbv, IEEE802.1Qbu, IEEE802.1Qch, IEEE802.1CB and IEEE802.1Qci, which can provide deterministic transmission with low delay and high reliability for data
Adopt Ring patented technology, support single ring, coupling ring, chain, Dual-homing function
Support DC or AC dual power redundancy (optional), input voltage: 12~55VDC or 85~264VAC
Support -40~75℃ wide operating temperature range
Introduction
ICS5400TSN-24GT16GS4XS-LN series are 44-port Gigabit/10Gigabit TSN (time sensitive network) switches, and layer 3 industrial Ethernet switches that integrates the characteristics of TSN. This series has 2 products, provides Gigabit copper port, Gigabit SFP slot and 10G SFP+ slot, 12~55VDC or 85~264VAC dual power supply input (optional). It adopts 1U rack-mounted installation to meet the requirements of different application sites.
TSN (Time Sensitive Networking) is a set of protocol standards developed by IEEE802.1 TSN task group. This standard defines the time sensitive mechanism of Ethernet data transmission, and ensures the transmission performance of business traffic in Ethernet by allowing some traffic packets to be forwarded first, clearing routes by using gating scheduling mechanism and bandwidth reservation. It adds certainty and reliability to the standard Ethernet to ensure that the Ethernet can provide stable and consistent service levels for the transmission of critical data. Currently, the supported basic TSN protocols include: IEEE 802.1AS, IEEE 802.1Qbv, IEEE 802.1Qbu, IEEE 802.1Qch, IEEE 802.1CB, IEEE 802.1Qci, etc.
The network management system supports various network protocols and industry standards, such as static routing, RIP, OSPF, OSPFv3, TSN, PTP, Ring, STP/RSTP/MSTP, ERPS, 802.1Q VLAN, QoS, NAS, GVRP, MVRP, DHCP Server/Snooping/Relay, IGMP/MLD Snooping, LLDP, LACP, etc. It also possesses complete management functions, support port configuration, port statistics, access control, network diagnosis, rapid configuration, online upgrade, etc.; CLI, WEB, Telnet, SNMP, SSH and other access methods can be supported. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.
This series product supports optional dual AC/DC power supply. The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply or port has link failure, ALARM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. The hardware adopts fanless, low power consumption and wide temperature design, and the external heat sink provides extraordinary heat dissipation performance. This series product has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, rail transit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.
Additional Features
TSN supports 802.1 TSN series standards and timely delivery of time-sensitive streams.
IEEE 802.1 AS High Precision Clock Synchronization
IEEE 802.1 Qbv Time Aware Shaper
IEEE 802.1 Qbu Frame Preemption
IEEE 802.1 Qch Cyclic Queuing and Forwarding
IEEE 802.1 CB Frame Replication and Elimination for Reliability
IEEE 802.1 Qci Per-Stream Filtering and Policing
SNMPv1/v2c/v3 is used for network management of various levels
RMON can be used for efficient and flexible network monitoring
QoS supports real-time traffic classification and priority setting
Storm suppression can restrain broadcast, unknown multicast and unicast
Port statistics can be used for the port real time traffic statistics
Alarm log and log server can record user operation, system failure, system security and other information locally and remotely
Relay alarm is convenient for troubleshooting of construction site
CFM function can determine the scope and boundary of maintenance domain
DHCP server and DHCP client could be used for allocating IP address of different strategies
DHCP Snooping can ensure DHCP client gets IP address from legal DHCP server
DHCP relay function can realize IP address, gateway, DNS configuration cross network segment
User privilege classification configuration can set user privilege level
Access Control can enhance network flexibility and security
SSH configuration and HTTPS configuration can improve device’s management security and guarantee data access security
Support AAA service, which can provide security assurance for various services
Port Trunking and LACP can increase network bandwidth and enhance the reliability of network connection to achieve optimum bandwidth utilization
Link OAM function can monitor the health of the network and locate faulted link and fault conditions
IPMC file configuration can deploy access control on IP multicast flow
MVR configuration supports multicast communication forwarding on multicast VLAN
IGMP Snooping can be used for filtering multicast traffic to save the network bandwidth
MLD Snooping could be used for managing and controlling IPv6 multicast group
LLDP can achieve automatic topology discovery, which is convenient for visual management
VLAN is used for simplifying network planning
VCL function can divide VLAN based on MAC address, protocol, and IP subnet.
GVRP configuration could be used for registering and unregistering VLAN properties
Ring, ERPS, STP/RSTP/MSTP can achieve network redundancy, preventing network storm
RIP, OSPF, OSPFv3 could achieve dynamic routing configuration
Loop detection could efficiently eliminate the influence caused by port loopback by detecting the existence of loopback
Network diagnosis and troubleshooting could be conducted via Ping, Traceroute, Link OAM and cable detection
Support DDM (digital diagnostic monitoring) function, which can monitor the optical power, temperature and other real-time parameters of SFP fiber module with DDM function, facilitating the link default diagnosis of optical fiber
Port mirroring can conduct data analysis and monitoring, which is convenient for online debugging
File management is convenient for the device rapid configuration and online upgrading
| Standard & Protocol | IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3ae for 10GbE SFP+ IEEE 802.1AS PTP for TSN IEEE 802.1Qbv IEEE 802.1Qbu IEEE 802.1Qch IEEE 802.1CB IEEE 802.1Qci IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN IEEE802.1p for CoS IEEE 802.1AB for LLDP IEEE 802.3ad for LACP ITU-T G.8032 for ERPS |
| TSN | PTP clock synchronization, frame preemption, time-aware shaper TAS, single stream filtering and management PSFP, frame reliability replication and FRER elimination |
| Management | SNMP v1/v2c/v3 Centralized Management of Equipment, RMON, QoS, LLDP, log information, Syslog server, CFM, port mirroring, DHCPv4 Server, DHCPv4/v6 Relay, file management, port statistics, DDMI |
| Security | User Privilege Classification, Authentication Method Configuration, SSH Configuration, HTTPS Configuration, Access Control, Port Security, NAS, ACL, IPv4/v6 Source Protection, ARP Detection, Radius Server Authentication, TACACS + Server Authentication, DHCPv4/v6 Snooping, Storm Suppression, Port Alarm, Power Supply Alarm, Loop Protection |
| Switch Function | 802.1Q VLAN, Private VLAN, ACL, Port Trunking, Bandwidth Management, Flow Control, Port Isolation, MAC Address Table |
| Unicast / Multicast | IPMC, MVR, IGMP Snooping, MLD Snooping, MVRP, GVRP |
| Redundancy Technology | Ring, STP/RSTP/MSTP, ERPS |
| Routing Technique | RIP, OSPF, OSPFv3 |
| Troubleshooting | Ping, Traceroute, Link OAM, cable detection |
| Time Management | NTP Client, Time Zone Configuration, PTP |
| Interface | Gigabit copper port: 10/100/1000Base-T(X) self-adaption or forced mode, RJ45, Automatic Flow Control, Full/Half Duplex Mode self-adaption, MDI/MDI-X Autotunning
Gigabit SFP: 100/1000Base-X self-adaption or forced mode, SFP slot 10Gigabit SFP: 1G/2.5G//10GBase-X self-adaption or forced mode, SFP+ slot Relay: support 1 relay alarm information output, using 3-pin 5.08mm pitch terminal blocks, and the current load capacity is 1A@30VDC or 0.3A@125VAC CONSOLE port: CLI command line management port(RS-232), RJ45 |
| Indicator | Power indicator, alarm indicator, running indicator, interface indicator |
| Switch Property | Transmission mode: store and forward
MAC address: 32K Buffer: 32Mbit Backplane bandwidth: 160G Switch time delay: <10μs |
| Power Supply | ICS5400TSN-24GT16GS4XS-LN-2LV:
Power supply range: 24VDC/48VDC (12~55VDC), dual power supply redundancy Connection mode: 5-pin 5.08mm pitch terminal blocks Connection protection: anti-reverse connection ICS5400TSN-24GT16GS4XS-LN-2HV: Power supply range: 110VAC/220VAC (85~264VAC), dual power supply redundancy Connection mode: AC socket with switch |
| Power Consumption | ICS5400TSN-24GT16GS4XS-LN-2LV:
No-load: 19.5W@24VDC Full-load: 47.3W@24VDC |
| Working Environment | Operating temperature: -40~75℃
Storage temperature:-40~85℃ Relative humidity: 5%～95% (no condensation) |
| Physical Characteristic | Housing: IP40 protection, metal
Installation: 19-inch 1U rack mounting Dimension (W x H x D): 441.6mm×44.45mm×290mm (lugs are not included) |
| Industrial Standard | IEC 61000-4-2 (ESD, electrostatic discharge), Level 3
Contact discharge: ±6kV Air discharge: ±8kV IEC 61000-4-4 (EFT, electrical fast transient), Level 3 Power supply: ±2kV Signal: ±2kV IEC 61000-4-5 (Surge), Level 3 Power supply: differential mode±1kV, common mode±2kV Signal: ±2kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
| Authentication | CE, FCC, RoHS |
| Warranty | 5 years |
| Available Models | Gigabit Copper Port | Gigabit SFP | 10Gigabit SFP+ | Power Supply |
| ICS5400TSN-24GT16GS4XS-LN-2LV | 24 | 16 | 4 | 12~55VDC, dual power supply |
| ICS5400TSN-24GT16GS4XS-LN-2HV | 24 | 16 | 4 | 85~264VAC, dual power supply |
Supporting Document
