Wall/Rail Mounting 8-Port 100M Layer 2 Managed Industrial Ethernet Switch for Rail Transit
Support 8 100M M12
Adopt SW-Ring patented technology, support single ring, coupling ring, chain, Dual-homing function
Support 110VDC (66~154VDC) or 24VDC(9~36VDC) power supply input
Support -40~ 75℃ wide temperature operation
Introduction
TNS5500D series is 8-port 100M layer 2 managed industrial Ethernet switch designed for rail transit. It conforms to the EN50155 and EN50121 industry standard. Ethernet interfaces, power interface and SERVICE port use firm and reliable M12 connectors which can adapt to usage scenario with severe vibration and shock. This product provides 8 100M M12 interfaces, and it adopts wall/rail mounting which can meet the requirements of different scenes.
Network management system supports various network protocols and industrial standards, such as STP/RSTP, 802.1Q VLAN, QoS function, IGMP Snooping, LLDP, Port Trunking, Port Mirroring. It also possesses complete management functions, including Port Setting, Bandwidth Management, Port Statistics, Access Control, Rapid Configuration, Online Upgrading and so on, and supports CLI, WEB, Telnet, SNMP and other access methods. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.
When port has link failure, ALARM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It is designed for rail transit industry and can be widely used in systems such as car PIS, CCTV, and train control.
Additional Features
SNMPv1/v2c is used for network management of various levels
Port mirroring can conduct data analysis and monitoring, which is convenient for online debugging
QoS supports real-time traffic classification and priority setting
LLDP can achieve automatic topology discovery, which is convenient for visual management
File management is convenient for rapid configuration and online upgrading of the device
Port statistics can be used for the port real time traffic statistics
User password can conduct user hierarchical management to improve the device management security
Relay alarm is convenient for troubleshooting of construction site
VLAN can be set to simplify network planning
Port Trunking can increase network bandwidth and enhance the reliability of network connection to achieve optimum bandwidth utilization
Bandwidth management can reasonably distribute network bandwidth, preventing unpredictable network status
IGMP Snooping and static multicast can be used to filter multicast data to save network bandwidth
SW-Ring and STP/RSTP can achieve network redundancy, preventing network storm
Loop protection could efficiently eliminate the influence caused by port loopback by detecting the existence of port loopback
| Standard & Protocol | IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1Q for VLAN IEEE 802.1p for CoS IEEE 802.1AB for LLDP |
| Management | SNMP v1/v2c Centralized Management of Equipment, Port Mirroring, QoS, LLDP, File Management, Port Statistics, and Log Information |
| Security | Classification of User Permissions, Port Alarm, Threshold Alarm, Loop Protection |
| Switch Function | 802.1Q VLAN, Port Aggregation, Bandwidth Management, Flow Control |
| Unicast / Multicast | Static Multicast, IGMP-Snooping |
| Redundancy Technology | SW-Ring, STP/RSTP |
| Time Management | SNTP |
| Interface | Power supply interface: M12 A-Coded 4-Pin (male) connector, the power occupies 2 pins, V- and V+
Relay alarm interface (reserved): M12 (Male), 4-Pin A-Coded, relay occupies two pins, RELAY1 and RELAY2 100M Ethernet port: 10/100Base-T(X), M12(Female), 4-Pin D-Code, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotunning Service port: CLI command line management port (RS-232), M12(Female), 4-Pin D-Code |
| Indicator | Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator |
| Switch Property | Transmission mode: store and forward
MAC address: 8K Buffer: 1Mbit Backplane bandwidth: 7.6G Switch time delay: <10μs |
| Power Supply | 110VDC (66~154VDC) or 24VDC (9~36VDC), M12 (Male), 4-Pin A-Coded |
| Power Consumption | Full-load: 3.8W@24VDC
No-load: 2.1W@24VDC |
| Working Environment | Operating temperature: -40~75℃
Storage temperature:-40~85℃ Relative humidity: 5%～95% (no condensation) |
| Mechanical Structure | Housing: IP67 protection, metal
Installation: wall/rail mounting Dimension (W x H x D): 175mm×104mm×53.2mm Weight: 0.642kg |
| Industrial Standard | IEC 61000-4-2 (ESD, electrostatic discharge), Level 3
Air discharge:± 8kV Contact discharge: ±6kV IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3 Power supply: ±2kV Ethernet port: ±1kV Relay: ±2kV IEC 61000-4-5 (Surge), Level 3 Power supply: common mode±2kV, differential mode±1kV Ethernet interface: ±2kV Relay: common mode ±2kV, differential mode±1kV Shock: IEC 61373 Free fall: IEC 60068-2-32 Vibration: IEC 61373 |
| Authentication | CE, FCC, RoHS, REACH, EN50155, EN50121-3-2, EN50121-4, IEC61373, EN45545, Q/CR 699-2019, Q/CRRC J26-2018 |
| Warranty | 5 years |
| Model | 100M M12 | Power Supply |
| TNS5500D-8T-P110 | 8 | 110VDC(66~154VDC) |
| TNS5500D-8T-P24 | 8 | 24VDC(9~36VDC) |
Supporting Document
