1 Port RS-485/422 to Ethernet Modbus Gateway
Support 1 RS-485/422 serial port and 1 10/100Base-T(X) self-adaptive Ethernet interface
Support conversion between Modbus RTU/ASCII and Modbus TCP protocol
Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes
Support virtual and real ID mapping to achieve flexible access between Master and Slave devices
Support 12~48VDC power supply input
Hỗ trợ dải nhiệt độ hoạt động rộng từ -40°C đến 75°C
Overview of 1 Port RS-485/422 to Ethernet Modbus Converter GW1101-1D(RS-485)-TB-P(12-48VDC)
GW1101-1D(RS-485)-TB-P(12-48VDC) is Modbus gateway designed for integrating Modbus RTU/ASCII and Modbus TCP networks; it can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocols. This product has 1 RS-485/422 serial port and 1 100M Ethernet copper port. It adopts wall mounting to meet the requirements of different application scenes.
Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, HTTPS, SNMP, SSH，SMTP, SNTP，DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported; it supports up to 256 Modbus TCP client (master) accesses and connects up to 128 Modbus TCP server (slave) devices. TELNET, WEB, SSHD and other access modes are also supported. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.
DIP switch can achieve one-button pull-up/down resistance and terminal resistance configuration. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system, etc.
Tính năng bổ sung
Support 110bps- 115200bps line speed and non-blocking communication
Support RTS/CTS, DTR/DSR and XON/XOFF flow control
Support response timeout setting of characters
Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes
Support up to 256 Modbus TCP client (master) accesses and connect up to 128 Modbus TCP server (slave) devices
Support virtual and real ID mapping to achieve flexible access between Master and Slave devices
Support IP address and MAC address filtering, which can achieve accurate access control easily
Support graded user management to implement humanized authority management
Support serial port status and parameters monitoring, ensuring the communication status is easy to read
Support multiple configuration forms and access controls like Windows configuration tool, TELNET, SSHD and WEB
Quản lý file giúp cấu hình thiết bị nhanh chóng và nâng cấp trực tuyến thuận tiện
SSHD and HTTPS can guarantee the access security of data
Thực hiện chẩn đoán và khắc phục sự cố mạng thông qua Ping và Traceroute
Support multiple alarm methods, including e-mail alarm, log alarm and SNMP Trap alarm
| Ethernet | Standard: 10Base-T, 100Base-TX
Protocol: Modbus TCP, TCP, IP, UDP, ARP, HTTP, TELNET, SNMP, ICMP, DHCP, DNS Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning Interface quantity: 1 Interface form: RJ45 Duplex mode: Full/Half Duplex Mode Self-adaption |
| Cổng nối tiếp | Standard: EIA RS-485, RS-422
Protocol: Modbus RTU/ASCII Quantity of serial port: 1 RS-485/422 serial port Tín hiệu RS-485: D+, D−, GND RS-422 signal: T+, T-, GND, R+, R- Baud rate: 110~115200bps Data bit: 7bit, 8bit Bit chẵn lẻ: Không (None), chẵn (Even), lẻ (Odd), Space, Mark Stop bit: 1bit, 2bit Interface form: adopt 5-pin 5.08mm pitch terminal blocks Directional control: RS-485 direction adopts Automatic Data Direction Control technology Pull high/low resistor for RS-485: 4.7kΩ Electromagnetic isolation strength: 3KVDC/2KVrms Operating mode: RTU Master, RTU Slave, ASCII Master and ASCII Slave Connection quantity: support up to 256 Modbus TCP client (master) accesses and connect up to 128 Modbus TCP server (slave) devices. |
| Configuration Method | WEB configuration management, TELNET configuration, Windows configuration tool, SSHD configuration |
| Bảo mật | User right classification, IP address filtering, MAC address filtering, SNMP/ Mail /System Log alarm, HTTP/HTTPS/SSHD/TELNET access control |
| Đèn báo | Power supply indicator, running indicator, Ethernet port indicator, serial port indicator |
| Nguồn cấp | 12~48VDC, 3-pin 5.08mm pitch terminal blocks
Power supply nonpolarity |
| Công suất tiêu thụ | No-load: ≤ 0.8W@12VDC (high temperature)
Full-load: ≤ 0.8W@12VDC (high temperature) |
| Môi trường làm việc | Nhiệt độ hoạt động: -40 ~ 75℃
Nhiệt độ lưu trữ: -40 ~ 85℃ Độ ẩm tương đối: 5% ~ 95% (không ngưng tụ) |
| Thông số vật lý | Vỏ thiết bị: kim loại, cấp bảo vệ IP40
Lắp đặt: treo tường Dimension (W x H x D): 97mm×110mm×25mm Weight: 0.3kg |
| Tiêu chuẩn công nghiệp | IEC 6100042 (ESD, electrostatic discharge), Level 3
Air discharge: ± 8kV Phóng điện tiếp xúc: ±6 kV IEC 6100044 (EFT, electrical fast transient pulses), Level 3 Nguồn cấp: ±2 kV Dòng điện: ±1kV IEC 6100045 (Surge), Level 3 Nguồn điện: Chế độ chung ±2kV, chế độ vi sai ±1kV Signal: common mode±2kV, differential mode±1kV Độ sốc: IEC 60068-2-27 Khả năng chịu rơi tự do: theo tiêu chuẩn IEC 60068-2-32 Dao động: IEC 60068-2-6 |
| Chứng nhận | CE, FCC, RoHS |
| Bảo hành | 3 years |
| Danh sách model | 100M Copper Port | RS-485/422 | Nguồn cấp |
| GW1101-1D(RS-485)-TB-P(12-48VDC) | 1 | 1 | 12~48VDC |
Tài liệu hỗ trợ
