Wall or Rack Mounting 4 RS-485 and 2 Fiber Port Unmanaged Ring Network Serial to Fiber MODEM
Support 4 RS-485 serial ports to 2 fiber ports.
Fiber port supports ring network function, and the automatic recovery time of network failure is < 20ms.
Support 0-115200bps line speed and non-blocking communication
Support 12~48VDC or 100~240VAC wide voltage range(optional)
Introduction
IMF204-2F series are high-performance unmanaged ring network serial to fiber MODEM designed for industrial application. This product supports point-to-point dual fiber port backup, or ring network redundancy of multiple devices. This product provides 4 RS-485 serial ports and 2 fiber ports. It adopts wall or rack mounting to meet the requirements of different application scenes.
DIP switch can implement master and slave configuration of the device. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in electricity distribution automation, industrial automation, transportation, telecommunication and other fields.
| Fiber interface | Interface quantity: 2 (support ring network redundancy)
Interface form: SC/ST/FC (optional) Transmission speed: 100Mbps Transmission distance: multimode: 2km Single mode: 20km
Transmission wavelength: multimode: 1310nm single mode: 1310nm or 1550nm |
|||||||||
| Serial Port | Standard: EIA RS-485
Quantity of serial port: 4 RS-485 serial port RS-485 signal: D+, D-, GND Baud rate: 0~115200bps Data bit: 5bit, 6bit, 7bit, 8bit Parity bit: None, Even, Odd, Space, Mark Stop bit: 1bit, 1.5bit, 2bit Interface form: 5-pin 5.08mm pitch terminal blocks Directional control: RS-485 direction adopts Automatic Data Direction Control technology Load capacity: RS-485/422 supports 32 points polling (customizable 128 points) Interface protection: 1.5kVAC isolation protection |
|||||||||
| Indicator | Running status indicator, master/slave device status indicator, fiber port indicator, serial port indicator | |||||||||
| Power supply | IMF204-2F-4DI(RS-485)-P(12~48VDC)
12~48VDC, 3-pin 5.08mm pitch terminal blocks Power supply nonpolarity
IMF204-2F-4DI(RS-485)-P(100~240VAC) 100~240VAC, 3-pin 5.08mm pitch terminal blocks |
|||||||||
| Power consumption |
|
|||||||||
| Working Environment | Operating temperature: -10~70℃
Storage temperature: -10~70℃ Relative humidity: 5%～95% (no condensation) |
|||||||||
| Physical Characteristic | Housing: IP30 protection, metal
Installation: wall or rack mounting Dimension (W x H x D): 200mm×35mm×120mm Weight: 603g |
|||||||||
| Authentication | CE, FCC, RoHS | |||||||||
| Warranty | 3 years |
| Available Models | Fiber Port | RS-485 | Power Supply |
| IMF204-2F | 2 | 4 | 12~48VDC |
Supporting Document
